Technical data • Individual components
126
Automation PC 810 with GM45 CPU board user's manual V1.28
3.6.11 5AC801.DVDS-00
3.6.11.1 General information
The DVD-ROM slide-in drive can be used in APC810 and PPC800 system units with slide-in drive slot.
Information:
A slide-in drive can be added or removed at any time.
When used in an APC810
When inserted in slide-in slot 1 or slide-in drive 2, the slide-in drive is referred to internally as SATA and USB.
3.6.11.2 Order data
Model number
Short description
Figure
Drives
5AC801.DVDS-00
DVD-ROM SATA drive, slide-in.
Table 77: 5AC801.DVDS-00 - Order data
3.6.11.3 Technical data
Information:
The following characteristics, features, and limit values only apply to this individual component and
can deviate from those specified for the entire device. For the entire device in which this individual
component is used, refer to the data given specifically for the entire device.
Product ID
5AC801.DVDS-00
General information
Certification
CE
Yes
cULus
Yes
GL
Yes
CD / DVD drive
Data transfer rate
Max. 1.5 Gbit/s
Speed
Max. 5090 rpm ±1%
Noise level
Approx. 45 dBA in a distance of 50 cm (full read access)
Compatible formats
CD-DA, CD-ROM mode 1/mode 2
CD-ROM XA mode 2 (form 1, form 2)
Photo CD (single/multi-session)
Enhanced CD, CD text
DVD-ROM, DVD-Video (Double Layer), DVD-R (Single/Multi-border), DVD-R DL (Sin-
gle/Multi-border), DVD-RW (Single/Multi-border), DVD+R (Single/Multi session), DVD+R
DL (Single/Multi session), DVD+RW (Single/Multi session), DVD-RAM (4.7 GB, 2.6 GB)
Laser class
Class 1 laser
Service life
60000 POH (Power-On Hours)
Interface
SATA
Startup time
CD
Max. 19 seconds (0 rpm to read access)
DVD
Max. 19 seconds (0 rpm to read access)
Access time
CD
Average of 130 ms
DVD
Average of 140 ms
Table 78: 5AC801.DVDS-00 - Technical data
