Technical data • Individual components
Chapter 2
Technical data
Automation PC 810 with GM45 CPU board user's manual V1.28
105
3.6.3 5AC801.HDDI-03
3.6.3.1 General information
This 250 GB slide-in compact hard disk is specified for 24-hour operation and The slide-in compact drive can be
used in APC810 and PPC800 system units.
When used in an APC810
When inserted in the slide-in compact slot, the slide-in compact drive is referred to internally as SATA.
3.6.3.2 Order data
Model number
Short description
Figure
Drives
5AC801.HDDI-03
250 GB SATA hard disk, slide-in compact; 24/7 hard disk. Re-
mark: Please see manual for proper use of the hard disk.
Optional accessories
Drives
5MMHDD.0250-00
250 GB SATA hard disk replacement for 5AC801.HDDI-03 and
5ACPCI.RAIC-05; Remark: Please see manual for proper use
of the hard disk.
Table 61: 5AC801.HDDI-03 - Order data
3.6.3.3 Technical data
Information:
The following characteristics, features, and limit values only apply to this individual component and
can deviate from those specified for the entire device. For the entire device in which this individual
component is used, refer to the data given specifically for the entire device.
Product ID
5AC801.HDDI-03
General information
Certification
CE
Yes
cULus
Yes
cULus HazLoc Class 1 Division 2
Yes
ATEX Zone 22
Yes
GL
Yes
Hard disk drive
Capacity
250 GB
Number of heads
1
Number of sectors
488,397,168
Bytes per sector
512
Cache
8 MB
Speed
5400 rpm ±0.2%
Startup time
Typ. 3.6 s (from 0 rpm to read access)
MTBF
550,000 POH
1)
S.M.A.R.T. support
Yes
Interface
SATA
Access time
5.56 ms
Supported transfer modes
SATA 1.0, Serial ATA Revision 2.6
PIO mode 0-4, multiword DMA mode 0-2, UDMA mode 0-6
Data transfer rate
Internal
Max. 1175 Mbit/s
To/From host
Max. 150 MB/s (SATA I), max. 300 MB/s (SATA II)
Positioning time
Minimum (track to track)
1 ms
Nominal (read only)
14 ms
Maximum (read only)
30 ms
Table 62: 5AC801.HDDI-03 - Technical data
