Appendix A • Temperature sensor locations
Appe
ndix
A
541
Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
Appendix A
1. Temperature sensor locations
Sensors monitor temperature values at different locations in the APC620 (inside CPU, CPU
board, power supply, slide-in drive 1, slide-in drive 2, I/O). The temperatures
1)
can be read out
in the BIOS (menu item Advanced - Baseboard/Panel Features - Baseboard Monitor) or via the
B&R Control Center
2)
using Microsoft Windows XP/Embedded and Embedded Standard 2009.
1) The measured temperature is a guideline for the immediate ambient temperature, but can be influenced by neighboring components.
2) The B&R Control Center - ADI driver - can be downloaded for free from the download area on the B&R homepage (
).
Figure 324: Temperature sensor locations
Position
Measurement point
for
Measurement
Max. specified
1
CPU internal
Processor temperature (sensor integrated on the processor).
90°C
2
CPU board
CPU board temperature (sensor integrated on the CPU board).
95°C
3
Power supply
Power supply temperature (sensor on the power supply).
95°C
4
Slide-in drive 1/2
Temperature of a slide-in drive (the sensor is integrated on the slide-in drive)
Drive dependent
5
I/O
Temperature under an add-on drive (sensor on the baseboard).
Max. 80°C
Drive dependent
Table 330: Temperature sensor locations
1
3
4
5
2
1 ... Inside CPU
2 ... CPU board
3 ... Power supply
4 ... Slide-in drive 1/2
5 ... I/O
Summary of Contents for Automation PC 620
Page 2: ...2 Automation PC 620 with 945GME N270 CPU board User s Manual V 1 10 ...
Page 4: ...4 Automation PC 620 with 945GME N270 CPU board User s Manual V 1 10 ...
Page 6: ...6 Automation PC 620 with 945GME N270 CPU board User s Manual V 1 10 ...
Page 568: ...568 Appendix A Glossary Automation PC 620 with 945GME N270 CPU board User s Manual V 1 10 ...