342
Software • Upgrade information
Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
2.4.1 Requirements
The following peripherals are required for creating a bootable USB flash drive:
•
B&R USB flash drive
•
B&R Industrial PC
•
USB Media Drive
•
B&R Embedded OS Installer (V3.00 or higher)
2.4.2 Procedure
•
Connect the USB flash drive to the PC.
•
If the drive list is not refreshed automatically, the list must be updated using the command
Drives > Refresh
.
•
Mark the desired USB flash drive in the drive list.
•
Change to the
Action
tab and select
Install a B&R Update to a USB flash drive
as type
of action.
•
Enter the path to the MS-DOS operating system files. If the files are part of a ZIP archive,
then click on the button
By ZIP file...
. If the files are stored in a directory on the hard drive,
then click on the button
By folder...
.
•
In the
B&R Upgrade
text box, it's also possible to enter the path to the ZIP file for the
B&R Upgrade Disk and select the file.
•
Click on the
Start action
button in the toolbar.
Figure 156: Creating a USB flash drive for B&R upgrade files
Summary of Contents for Automation PC 620
Page 2: ...2 Automation PC 620 with 945GME N270 CPU board User s Manual V 1 10 ...
Page 4: ...4 Automation PC 620 with 945GME N270 CPU board User s Manual V 1 10 ...
Page 6: ...6 Automation PC 620 with 945GME N270 CPU board User s Manual V 1 10 ...
Page 568: ...568 Appendix A Glossary Automation PC 620 with 945GME N270 CPU board User s Manual V 1 10 ...