B&R 5PP520.0573-00, User Manual

Page: 266 / 319

Accessories • CompactFlash cards
266 Power Panel 500 user's manual V1.40
Product ID 5CFCRD.
0064-03
5CFCRD.
0128-03
5CFCRD.
0256-03
5CFCRD.
0512-03
5CFCRD.
1024-03
5CFCRD.
2048-03
5CFCRD.
4096-03
5CFCRD.
8192-03
MTBF >4,000,000 hours (at 25°C)
Maintenance None
Supported operating modes PIO Mode 0-4, Multiword DMA Mode 0-2
Sequential read
Typical 8 MB/s
Sequential write
Typical 6 MB/s
Certification
CE Yes
cULus Yes
GOST-R Yes
GL Yes
1)
Endurance
SLC flash Yes
Clear/Write cycles
Typical >2,000,000
Wear leveling Static
Error correction coding (ECC) Yes
S.M.A.R.T. support No
Support
Hardware MP100/200, PP100/200, PP300/400, PP500, PPC300, PPC700, PPC725,
PPC800, Provit 2000, Provit 5000, APC620, APC680, APC810, APC820
Operating systems
Windows 7 32-bit No
Windows 7 64-bit No
Windows Embedded Standard 7,
32-bit
No No No No No No No Yes
Windows Embedded Standard 7,
64-bit
No
Windows XP Professional No No No No No No Yes Yes
Windows XP Embedded No No No Yes Yes Yes Yes Yes
Windows Embedded Standard 2009 No No No No Yes Yes Yes Yes
Windows CE 6.0 Yes Yes Yes Yes Yes Yes Yes Yes
2)
Windows CE 5.0 Yes Yes Yes Yes Yes No No No
Software
PVI Transfer ≥V2.57 (part of PVI Development Setup ≥ V2.5.3.3005)
B&R Embedded OS Installer ≥V2.21
Environmental conditions
Temperature
Operation 0 to 70°C
Storage -50 to 100°C
Transport -50 to 100°C
Relative humidity
Operation 8 to 95%, non-condensing
Storage 8 to 95%, non-condensing
Transport 8 to 95%, non-condensing
Vibration
Operation Max. 16.3 g (159 m/s² 0-peak)
Storage Max. 30 g (294 m/s² 0-peak)
Transport Max. 30 g (294 m/s² 0-peak)
Shock
Operation Max. 1000 g (9810 m/s² 0-peak)
Storage Max. 3000 g (29430 m/s² 0-peak)
Transport Max. 3000 g (29430 m/s² 0-peak)
Elevation
Operation Max. 24383 m
Mechanical characteristics
Dimensions
Width 42.8 ±0.10 mm
Length 36.4 ±0.15 mm
Height 3.3 ±0.10 mm
Weight 11.4 g
Table 200: 5CFCRD.0064-03, 5CFCRD.0128-03, 5CFCRD.0256-03, 5CFCRD.0512-03,
5CFCRD.1024-03, 5CFCRD.2048-03, 5CFCRD.4096-03, 5CFCRD.8192-03 - Technical data
1) Yes, although applies only if all components installed within the complete system have this certification
2) Not supported by the B&R Embedded OS Installer.