Standards and certifications • Certifications
Chapter 5
Standards and certifications
Power Panel 500 user's manual V1.40
245
2 Certifications
Danger!
A complete system can only receive certification if ALL of the individual components it includes have
the applicable certifications. If an individual component is being used that DOES NOT have an applic-
able certification, then the complete system WILL NOT receive certification.
B&R products and services comply with applicable standards. This includes international standards from organi-
zations such as ISO, IEC and CENELEC, as well as national standards from organizations such as UL, CSA, FCC,
VDE, ÖVE, etc. We are committed to ensuring the reliability of our products in an industrial environment.
Unless otherwise specified, the following certifications apply:
2.1 UL certification
Products with this mark have been tested by Underwriters Laboratories and are listed
as "Industrial Control Equipment". This mark is valid for the USA and Canada and
simplifies the certification of your machines and systems in these areas.
Underwriters Laboratories (UL) in accordance with the UL508 standard - 17th Edition
Canadian (CSA) standard in accordance with C22.2 No. 142-M1987
2.2 GOST-R
Products with this mark have been certified by an accredited testing laboratory and
have been approved for import to the Russian Federation (based on CE compliance).
2.3 GL certification (Germanischer Lloyd)
Some B&R products have been certified by Germanischer Lloyd and are approved for
use in maritime environments. GL certificates (type approval) are generally accepted
by other classification societies during ship acceptance procedures.
Germanischer Lloyd (GL) in accordance with standard GL 2003 (Category C EMC 1)
Category C concerns devices that are protected from the effects of weather. EMC 1
defines the radiated and conducted emission limits for devices installed on a ship's
bridge.
Information:
Line filter 5AC804.MFLT-00 is absolutely mandatory in the supply line when used in a maritime envi-
ronment. Additional information can be found on page Connecting to the end device.
The following table lists revisions from which GL certification applies to individual components.
