Accessories
142
Automation Panel 9xD - Hygienic design User's manual V 1.80
9.11 Replacement parts
The following replacement parts can be ordered for the Panel PC 2100 swing arm and Panel PC 2200 swing arm:
•
Mounting screws for PPC2100
•
Mounting screws for PPC2200
•
Slot cover for interfaces
•
Cover for CFast slot
•
Battery compartment 5ACCRPC2.0003-000 for PPC2200
(corresponds to the variant supplied with the configuration
"5ACCBT01.0000-001" on page 97
9.11.1 Replacement parts - Order data
Material number
Description
5ACCRPC2.0000-000
REP PPC2100/2200 mounting screws kit - 4x screw M3x34 mm - 2x special screw for PPC2100
5ACCRPC2.0001-000
REP xPC2100/2200 interface covers - 1x cover set
5ACCRPC2.0002-000
REP xPC2200 CFast card cover
5ACCRPC2.0003-000
REP xPC2200 battery compartment - 1x battery holder for xPC2200 - 1x battery including circuit board
9.11.1.1 5ACCRPC2.0003-000 - Technical data
Information:
The following specified characteristic data, features and limit values are only valid for this accessory
and may differ from those of the complete system. The data specified for the complete system applies
to the complete system in which this accessory is installed, for example.
Model number
5ACCRPC2.0003-000
General information
Battery
Type
Panasonic 1000 mAh
Nominal voltage
3 V
Service life
8 years
1)
Removable
No
2)
Variant
Lithium
Certifications
CE
Yes
UL
Not relevant
Operating conditions
Pollution degree per EN 61131-2
Pollution degree 2
Ambient conditions
Temperature
Operation
-25 to 60°C
Storage
-25 to 60°C
Transport
-25 to 60°C
Relative humidity
Operation
5 to 90%
Storage
5 to 95%
Transport
5 to 95%
Mechanical properties
Housing
Material
Dyed gray (similar to Pantone 432C) plastic
Weight
Approx. 13 g
Table 67: 5ACCRPC2.0003-000 - Technical data
1)
At 50°C, 6 µA for the components being supplied.
2)
The battery is permanently installed in the battery compartment and cannot be replaced. The entire battery compartment must always be replaced.
