Accessories
Order number
5AC804.MFLT-00
Dimensions
Width
54 mm
Length
94 mm
Depth
32.15 mm
Weight
205 g
1)
Yes, but applies only if all components installed in the complete system have this certification and the complete system bears the corresponding mark.
2)
Yes, but applies only if all components installed in the complete system have this certification and are listed on the associated DNV certificate for the product
family.
3)
IEC 61010-2-201 requirements must be observed.
9.5.1.4 Dimensions
35°
10
94
14.3
22
1
54
9.5.1.5 Drilling template
ø 3.5
2x
ø 5.4
4x
47
45
9
7
0
0
9
22
72
85
9.5.1.6 Connecting to the end device
The line filter must be connected between the power supply and the end device. The following figure shows a
connection diagram.
Line filter
End device
The following points must be observed:
•
Use shielded, twisted wires.
•
Keep the lines as short as possible (power supply - line filter - end device).
•
The line filter must be installed on an uncoated, oil-free metallic surface.
96
Automation Panel 9x3 User's manual 2.01
