Technical data
4.2.2.2 5DLSD3.1001-00
4.2.2.2.1 General information
•
Link module for Automation Panel 9x3/1000/5000
•
1x SDL3 Panel In interface
•
2x USB 2.0 type A
4.2.2.2.2 Order data
Order number
Short description
Figure
Link modules
5DLSD3.1001-00
Automation Panel link module - SDL3 receiver - For Automation
Panel 923/933/1000 - For Automation Panel 5000
Required accessories
Accessories
0TB103.9
Connector 24 VDC - 3-pin, female - Screw clamp terminal block
3.31 mm²
0TB103.91
Connector 24 VDC - 3-pin, female - Cage clamp terminal block
3.31 mm²
Optional accessories
SDL3/SDL4/PoE cables
5CASD3.0010-00
SDL3/SDL4/FT50 cable - 1 m - FT50 including Power over Eth-
ernet
5CASD3.0030-00
SDL3/SDL4/FT50 cable - 3 m - FT50 including Power over Eth-
ernet
5CASD3.0050-00
SDL3/SDL4/FT50 cable - 5 m - FT50 including Power over Eth-
ernet
5CASD3.0070-00
SDL3/SDL4/FT50 cable - 7 m - FT50 including Power over Eth-
ernet
5CASD3.0100-00
SDL3/SDL4/FT50 cable - 10 m - FT50 including Power over Eth-
ernet
5CASD3.0150-00
SDL3/SDL4/FT50 cable - 15 m - FT50 including Power over Eth-
ernet
5CASD3.0200-00
SDL3/SDL4/FT50 cable - 20 m - FT50 including Power over Eth-
ernet
5CASD3.0300-00
SDL3/SDL4/FT50 cable - 30 m - FT50 including Power over Eth-
ernet
5CASD3.0500-00
SDL3/SDL4/FT50 cable - 50 m - FT50 including Power over Eth-
ernet
5CASD3.1000-00
SDL3/SDL4/FT50 cable - 100 m - FT50 including Power over
Ethernet
4.2.2.2.3 Technical data
Information:
The following specified characteristic data, features and limit values are only valid for these individual
components and may differ from those of the complete system. The data specified for the complete
system applies to the complete system in which this individual component is used, for example.
Order number
5DLSD3.1001-00
General information
LEDs
Status, Link
B&R ID code
0xE3FC
Certifications
CE
Yes
UKCA
Yes
UL
cULus E115267
Industrial control equipment
HazLoc
cULus HazLoc E180196
Industrial control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T4
1)
EAC
Product family certification
Interfaces
USB
Quantity
2
Type
USB 2.0
Variant
2x type A
Transfer rate
Low speed (1.5 Mbit/s), full speed (12 Mbit/s) to high speed (30 Mbit/s)
Current-carrying capacity
Total max. 1 A
SDL3 In
Variant
RJ45, shielded
Type
SDL3
Automation Panel 9x3 User's manual 2.01
67
