Appendix A
Automation Panel 1000 user's manual V2.00
187
Appendix A
A.1 Abbreviations
Abbreviation
Stands for
Description
Normally closed
Stands for a normally closed relay contact.
NC
Not connected
Used in pinout descriptions if a terminal or pin is not connected on the module
side.
ND
Not defined
Stands for an undefined value in technical data tables. This may be because the
cable manufacturer has not provided a value for certain technical data.
NO
Normally open
Stands for a normally open relay contact.
TBD
To be defined
Used in technical data tables if there is currently no value for specific technical
data. The value will be supplied later.
MTBF
Mean time between failures
The expected value of the operating time between two consecutive failures.
Table 82: Abbreviations used in this user's manual
A.2 Viewing angles
For viewing angle specifications (R, L, U, D) of the display types, see the technical data of the individual compo-
nents.
R
L
U
D
6 o'clock direction
A.3 Chemical resistance
Single-touch panels are manufactured with the Autotex panel overlay.
Panel overlay
Touch screen
Aluminum front, naturally anodized
(Frame)
Figure 99: Single-touch panel with Autotex panel overlay, naturally anodized
The front of the following single-touch panels are coated:
•
5AP1120.101E-000
•
5AP1120.121E-000
•
5AP1120.156B-000
