X20 system modules • Analog output modules • X20AO2632-1
X20 system User's Manual 3.10
467
4.4.6 X20AO2632-1
4.4.6.1 General information
The module is equipped with two outputs with 16-bit (including sign) digital converter resolution. It is possible to
select between the current and voltage signal using different connection terminal points.
This module is designed for X20 6-pin terminal blocks. If needed (e.g. for logistical reasons), the 12-pin terminal
block can also be used.
•
2 analog outputs
•
Either current or voltage signal possible
•
Extended signal range
•
16-bit digital converter resolution
4.4.6.2 Order data
Model number
Short description
Figure
Analog output modules
X20AO2632-1
X20 analog output module, 2 outputs, ±11 V / 0 to 22 mA, 16-
bit resolution
Required accessories
Bus modules
X20BM11
Bus module, 24 VDC keyed, internal I/O supply continuous
Terminal blocks
X20TB06
X20 terminal block, 6-pin, 24 VDC keyed
X20TB12
X20 terminal block, 12-pin, 24 VDC keyed
Table 96: X20AO2632-1 - Order data
4.4.6.3 Technical data
Product ID
X20AO2632-1
Short description
I/O module
2 analog outputs, ±11 V or 0 to 22 mA
General information
B&R ID code
0xC36E
Status indicators
I/O function per channel, operating state, module status
Diagnostics
Module run/error
Yes, using status LED and software
Channel type
Yes, using software
Power consumption
Bus
0.01 W
Internal I/O
1.25 W
Additional power dissipation caused by the actua-
tors (resistive) [W]
-
Electrical isolation
Channel - Bus
Yes
Channel - Channel
No
Certification
CE
Yes
cULus
Yes
ATEX Zone 2
Yes
KC
Yes
GL
Yes
GOST-R
Yes
Analog outputs
Output
±11 V or 0 to 22 mA, via different terminal connections
Digital converter resolution
Voltage
±15-bit
Current
15-bit
Conversion time
50 µs for all outputs
Settling time for output changes over entire range
500 µs
Power on/off behavior
Internal enable relay for booting
Table 97: X20AO2632-1 - Technical data
Summary of Contents for X20 System
Page 2: ......
