Coated modules • Expandable bus controllers • X20cBC8084
X20 system User's Manual 3.10
2597
5.16.4 X20cBC8084
5.16.4.1 General information
With regard to hardware and software, this module is identical to the uncoated module of the same name.
The only differences are the:
•
Model number
•
Module ID
•
Environmental conditions
•
Additional coating (see chapter 5 "Coated modules")
For a complete description of the hardware, see 4.19.4 "X20BC8084".
5.16.4.2 Order data
Model number
Short description
Figure
Expandable bus controllers
X20cBC8084
X20 bus controller, coated, 1 POWERLINK interface, 1x link se-
lector, for POWERLINK cable redundancy, supports active X20
hub module expansions, 2 RJ45, order bus base, power supply
module and terminal block separately.
Required accessories
System modules for bus controllers
X20cBB80
X20 bus base, coated, for X20 base module (BC, HB, etc.)
and X20 power supply module, X20 end plates X20AC0SL1/
X20AC0SR1 (left and right) included
X20cPS9400
X20 power supply module, coated, for bus controller and internal
I/O supply, X2X Link supply
System modules for expandable bus controllers
X20cBB82
X20 bus base, coated, for X20 base module (BC, HB, etc.) and
X20 power supply module, with 2 expansion slots for 2 X20
add-on modules (IF, HB, etc.), X20 locking plates (left and right)
X20AC0SL1/X20AC0SR1 included
Terminal blocks
X20TB12
X20 terminal block, 12-pin, 24 VDC keyed
Optional accessories
System modules for the X20 redundancy system
X20cHB2885
X20 hub expansion module, coated, integrated active 2-port
hub, 2x RJ45
Table 988: X20cBC8084 - Order data
Summary of Contents for X20 System
Page 2: ......
