B&R Industries Provit 5000, User Manual

Page: 94 / 400

Provit 5000 User’s Manual 93
Chapt
er
2
C
on
tro
lle
rs
Controllers • System Unit with Socket 7 (ZIF)
Data (e.g. the operating hours of the display) is also transmitted simultaneously via the Panellink
cable.
7.13.2 CRT Connection:
An external monitor can be connected to this interface.
The built-in graphic controller allows a flat display and an external monitor to be operated
simultaneously. Settings in this regard can either be changed in BIOS under the menu item
"Additional Peripherals" or with software, using a graphic driver (online help for the driver).
Simultaneous operation of a monitor is not possible with SXGA TFT displays and LCD
displays.
Note: The corresponding C&T graphic driver for Windows 3.11/95/98/NT is available from B&R.
FPD Interface
Panellink
9 pin DSUB socket
Pin Assignment
1 GND
2 TXC+ / RS485A
3 TX0+ / VCC
4 TX1+ / +12V
5 TX2+ / GND
6 TXC- / RS485B
7 TX0- / VCC
8 TX1- / +12V
9 TX2- / GND
Table 61: FPD interface pin assignments
CRT Connection:
Pin Assignment Pin Assignment
15 pin DSUB socket
1 R 9 +5V
2 G 10 GND
3 B 11 n.c.
4 n.c. 12 DDC Data
5 GND 13 HSYNC
6 GND 14 VSYNC
7 GND 15 DDC CLK
8 GND
Table 62: Pin assignment connection for CRT: