B&R Industries Provit 5000, User Manual

Page: 85 / 400

84 Provit 5000 User’s Manual
Controllers • System Unit with Socket 7 (ZIF)
7.4 Processor Socket
The following processors can be used in the system units listed:
Processors can only be ordered from B&R together with a corresponding system unit
and vice versa. All system units supplied by B&R are therefore equipped with a
processor. All installation and setting work takes place at B&R. If processors are used
which have not been supplied by B&R, the warranty claim is then void.
7.5 Jumper Settings
Jumper settings for system units 5C5002.02, 5C5001.03 and 5C5601.01 can be made in the
following places on the mainboard:
Jumper 1: Processor clock frequency
Jumper 2: Processor supply voltage
Processor Type Intel Pentium Intel Pentium MMX AMD K6
System Units 5C5001.01, 5C5001.03, 5C5601.01
Clock Frequency [MHz] 100 / 120 / 133 / 150 / 166 / 200 200 166 / 266
1st Level Cache 2 x 8 KB 2 x 16 KB 2 x 32 KB
Socket Socket 7 (ZIF socket)
Table 46: Processors to be used
Figure 42: Jumper settings on mainboards with Socket 7 (ZIF)