B&R Industries Provit 5000, User Manual

Page: 134 / 400

Provit 5000 User’s Manual 133
Chapt
er
2
C
on
tro
lle
rs
Controllers • Bus Unit
9.6 IPC5000 and IPC5600 Current Requirements / Power Consumption
To calculate the power consumption of Provit IPCs, tables are created with recommended values
for power consumption for the individual components. The current requirements of the individual
components are arranged according to the necessary supply voltages, showing the respective
current requirements for each supply voltage (+5 V, -5 V, +12 V and -12 V).
The values specified are typical values and show a certain tolerance. This depends on
configuration details and cannot be determined exactly.
Components
Current Requirements for Supply Voltage
+5 V -5 V +12 V -12 V
Mainboard with 8 MB DRAM (SIMM) 2 A - 0.1 A 0.1 A
Mainboard with 64 MB DRAM (SIMM) 2.2 A - 0.1 A 0.1 A
Intel Pentium 100 MHz
At 24 VDC supply
At 240 VAC supply 2 A
-
-
- -
Up to 0.9 A
-
-
Intel Pentium 166 MHz
At 24 VDC supply
At 240 VAC supply 2.8 A
-
-
- -
1.2 A
-
-
Intel Pentium 200 MHz
With 24 VDC supply
With 240 VAC supply 3.1 A
-
-
- -
1.3 A
-
-
Interface Board 0.5 A - 0.1 A -
Hard Disk 0.5 A - - -
Disk Drive 0.1 A - - -
PC Card
1)
1) The data sheet for the respective manufacturer is available
- - -
Cards in the ISA or PCI Slot Max. 2 A
1)
Max. 0.3 A
1)
Max. 1 A
1)
Max. 0.4 A
1)
Panelware Keypad Modules - - 0.2 A -
Display Units 5D5500 series 0.5 A - 0.9 A -
Display Units 5D5200 Series 10.4" TFT 0.5 A - 0.5 A -
Display Units 5D5200 Series 13.8" TFT 0.7 A - 0.9 A -
Display Units 5D5200 Series 15" TFT 0.8 A - 0.9 A -
Display Unit 18.1" TFT 2.6 W IPC side
2)
2) 25.5 W on the side of the external supply voltage
24 VDC Supply
Max. Current Requirements (total)
Max. Power Consumption (total)
10 A 0.3 A 4 A 1 A
60 W
240 VAC Supply
Max. Current Requirements (total)
Max. Power Consumption (total)
15 A (6 A
3)
)
3) For bus unit 5C5000.01
0.3 A 6 A (3 A
3)
) 1 A (0.7 A
3)
)
100 W (60 W
3)
)
Table 99: Current requirements / power consumption of the components