B&R Industries Power Panel 300, User Manual

Page: 49 / 612

Technical data • Power Panel 300 with BIOS
Chap
ter 2
Te
chn
ica
l da
ta
49 Power Panel 300/400 User's Manual V 2.30
2.1.7 Status LEDs
Power Panels are equipped with two status LEDs that are visible on the outside.
2.1.8 Ethernet connection
Status LEDs
LED Color Meaning
1x three-color, 1x one-color
Power
Green On Supply voltage OK
Red On
The system is in standby mode
(S5: soft-off mode or S4:
hibernate mode - suspend-to-
disk)
User
Yellow On Can be used as the user wants
(for example, can be turned
on/off directly using the ADI
library - only possible in S0
state)
Green Off
CF Yellow On
Indicates access to
CompactFlash drive (read or
write)
Table 15: Status LEDs
Ethernet connection
Controller Intel 82551ER RJ45 twisted pair (10BaseT/100BaseT), female
Cabling S/STP (category 5)
Transfer rate 10/100 MBit/s
1)
1) Both operating modes possible. Change-over takes place automatically.
LED On Off
Green 100 MBit/s 10 MBit/s
Orange Link
(Ethernet network
connection
available)
Activity (blinking)
(Data transfer in
progress)
Table 16: Ethernet connection