B&R Industries Power Panel 300, User Manual

Page: 478 / 612

478
Software • Power Panel 300 with BIOS
Power Panel 300/400 User's Manual V 2.30
1.5.2 Memory and cache optimization
1.5.3 System clock/PLL configuration
1.5.4 Power management
1.5.5 Device information
This BIOS page is only provided for information purposes - therefore, no default BIOS values are
available.
Fan -
Battery -
Setting Default value
Cache mode Write back
Cache allocate Disabled
Refresh rate Auto
Table 168: Memory and cache optimization default values
Setting Default value
Clock determined by H/W strapping
CPU multiplier 500 MHz
RAM multiplier 333 MHz
Table 169: System clock/PLL configuration default values
Setting Default value
BIOS PM at boot Disabled
APM available Yes
ACPI available Yes
S1 clocks Off
CPU clock gating Enabled
Chipset clock gating Enabled
Power button ACPI mode
Power loss control Power-on
Table 170: Power management default values
Drive configuration Default value
Table 167: Motherboard device configuration default values (Forts.)