B&R Industries Power Panel 300, User Manual

Page: 434 / 612

434
Software • Power Panel 300 with BIOS
Power Panel 300/400 User's Manual V 2.30
1.3.2 Time
The currently configured system time is displayed here. The time is buffered by a battery (CMOS
battery) after the Power Panel device has been switched off.
By selecting the item "Time" and the confirming by pressing Enter, or using the shortcut "A", you
can enter a new system time. The format HH:MM[:SS] must be entered as follows:
Example: Set time to 13:00:00.
The entry can be made in three different ways using the keyboard:
I Device information Important parameters (e.g. temperature, mode/node position, etc.) for a Power Panel device
are displayed here.
H Miscellaneous configuration The various BIOS settings can be configured here (Summary screen, Halt on errors, etc.)
O Boot order The boot order can be set here.
L Load defaults Load the optimal BIOS settings for best performance.
S Save values without exit Saves BIOS values without exiting BIOS setup.
Q Exit without save Exits BIOS setup without saving any changes.
X Save values and exit Saves settings and exits BIOS setup.
Figure 271: Time
Shortcut BIOS setup menu Function
Table 139: Overview of BIOS main menu functions (Forts.)
XpressROM Setup
F1/ALT+H:Show Help ESC:Exit ALT+Q:Go to Main Menu ENTER:Select +/-:Choice
T. Time 12:30:25
D. Date 04/19/2007
B. Motherboard Device Configuration
M. Memory an Cache Optimization
C. System Clock/PLL Configuration
P. Power Management
I. Device Information
H. Miscellaneous Configuration
O. Boot Order
L. Load Defaults
S. Save Values Without Exit
Q. Exit Without Save
X. Save values and Exit
Main Menu
Set the current time in the RTC
Main Menu/T. Time
Time: _
TIME as HH:MM[:SS] (Seconds are optional)