Technical data • Individual components
74
Panel PC 2100 swing arm user's manual V1.00
Product ID
5ACCIF01.FPLS-000
Environmental conditions
Temperature
Operation
-20 to 55°C
Storage
-20 to 60°C
Transport
-20 to 60°C
Relative humidity
Operation
5 to 90%
Storage
5 to 95%
Transport
5 to 95%
Mechanical characteristics
Weight
25 g
Table 59: 5ACCIF01.FPLS-000 - Technical data
1)
More information is available in the Automation Studio help system (Communication - POWERLINK - General information - Hardware - IF / LS).
3.4.1.3.1 POWERLINK interface - Pinout
The POWERLINK interface on the system unit is referred to as IF1.
POWERLINK - IF1
1)2)
Cabling
S/STP (Cat 5e)
Cable length
Max. 100 m (min. Cat5e)
Status LED
On
Off
Green
See Status/Error LED.
Link LED
On
Off
Yellow
Link (POWERLINK net-
work connection available)
Activity (blinking - da-
ta transfer in progress)
RJ45, female
1
Status LED
Link LED
Table 60: 5ACCIF01.FPLS-000 - POWERLINK interface
1)
The interfaces, etc. available on the device or module have been numbered as such for easy identification. This numbering may differ from that used by
the particular operating system.
2)
This interface is referred to as IF1 in Automation Studio / Automation Runtime.
3.4.1.3.2 COM A serial interface - Pinout
The COM A serial interface on the system unit is referred to as IFx.
Serial interfaceCOM A - IFx
1)2)3)
RS232
Type
RS232, modem-capable, not electrically isolated
UART
16550-compatible, 16-byte FIFO
Transfer rate
Max. 115 kbit/s
Bus length
Max. 15 m
Pin
Assignment
1
DCD
2
DSR
3
RXD
4
RTS
5
TXD
6
CTS
7
DTR
8
RI
9
GND
10
GND
10-pin, male
1 3 5 7
2 4 6 8 10
9
Table 61: 5ACCIF01.FPLS-000 - COM A interface
1)
The interfaces, etc. available on the device or module have been numbered as such for easy identification. This numbering may differ from that used by
the particular operating system.
2)
This interface (if available) is enabled automatically in BIOS on the APC2100 / PPC2100 as COM A with default I/O address 3F8h and IRQ 4.
3)
This interface is referred to as IF5 in Automation Studio / Automation Runtime.
