Software • BIOS options
Chapter 4 Software
Panel PC 2100 swing arm user's manual V1.00
129
1.8.2 Boot configuration
Figure 85: Boot - Boot configuration
BIOS setting
Function
Configuration options
Effect
On
Enables the numeric keypad
NumLock
Option for configuring the numeric keypad (Num
Lock) when booting the system
Off
Only enables the cursor (movement) functions
of the numeric keypad
Timeout
Option for configuring how long the setup activa-
tion key (key for entering BIOS) and boot logo
are displayed
1
to 99
Displays the setup activation key for x seconds
Yes
Enables BIOS compatibility mode and allows
the use of operating systems without UEFI sup-
port. Legacy and UEFI boot are possible.
CSM support
Depending on the operating system, the com-
patibility support module (BIOS compatibility
mode) supports backwards compatibility for
BIOS legacy boot settings.
No
BIOS compatibility mode is enabled and only
the UEFI boot is possible. Legacy boot is not
supported.
Disabled
Disables this function
Quick boot
Option for reducing the boot time by skipping
some POST procedures
Enabled
Enables this function
Disabled
Does not display the "Diagnostic splash screen"
Diagnostic splash screen
Setting for enabling/disabling the "Diagnostic
splash screen" when booting
Enabled
Always displays the "Diagnostic splash screen"
when booting
Disabled
Disables this function
Diagnostic summary
screen
Option for enabling/disabling the "Diagnostic
splash screen" when booting
Enabled
Enables this function
Disabled
Disables this function
Console redirection
Option for configuring the remote console. The
remote console can be used to access BIOS
Setup via the serial interface using a terminal
emulator (PuTTY or HyperTerminal).
Information:
This function is only possible with the
5ACCIF01.FPLS-000 IF option.
Enabled
Enables this function
All
Allows access via any serial interface
Port console
1)
Option for configuring the serial interface
UART A, UART B, UART C,
UART D, UART E, UART F
Allows access via the selected serial interface
ANSI
Enables the ANSI convention (extended ASCII
character set)
VT100
Enables the VT100 convention (ASCII charac-
ter set)
Terminal type
1)
Option for configuring keyboard input
VT100+
Enables the VT100+ convention (ASCII charac-
ter set and support for color, function keys, etc)
Table 111: Boot - Boot configuration
