B&R Industries 5AP92D.1505-00 User Manual Download

Page: 144 / 191

Software • B&R Automation Device Interface (ADI) - Control Center

144

Panel PC 2100 swing arm user's manual V1.00

Supports the following systems:

•

Automation PC 510

•

Automation PC 511

•

Automation PC 620

•

Automation PC 810

•

Automation PC 820

•

Automation PC 910

•

Automation PC 2100

•

Panel PC 300

•

Panel PC 700

•

Panel PC 725

•

Panel PC 800

•

Panel PC 900

•

Panel PC 2100

•

Power Panel 100/200

•

Power Panel 300/400

•

Power Panel 500

•

Mobile Panel 40/50

•

Mobile Panel 100/200

•

Connected Automation Panel 800

•

Connected Automation Panel 900

6.2 Installation

A detailed description of the Control Center can be found in the integrated help system. The B&R Automation

Device Interface (ADI) driver (also contains Control Center) is available at no charge in the Downloads section of

the B&R website (

www.br-automation.com

1. Download and unzip the .zip archive.
2. Close all applications.
3. Run the Setup.exe file (e.g. double-click on it in Explorer).

Information:

The ADI driver is already included in B&R images of embedded operating systems.
If a more current ADI driver version exists (see the Downloads section of the B&R website), it can be

installed later. It is important that Enhanced Write Filter (EWF) is disabled for this.

Summary of Contents for 5AP92D.1505-00
































































































































































































Search results

Summary of Contents for 5AP92D.1505-00

Reviews:

Related manuals for 5AP92D.1505-00

Brands by name

Popular brands

B&R Industries 5AP92D.1505-00, User Manual

Search results

Summary of Contents for 5AP92D.1505-00

Reviews:

Related manuals for 5AP92D.1505-00

Brands by name

Popular brands