Technical data
Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation
207
2.3.6 Battery compartment
2.3.6.1 5ACCBT01.0000-001
2.3.6.1.1 General information
The lithium battery is needed to retain BIOS CMOS data and to back up the real-time clock (RTC).
The battery is subject to wear and must be replaced if the battery capacity is insufficient (state "Bad").
2.3.6.1.2 Order data
Model number
Short description
Figure
Accessories
5ACCBT01.0000-001
Battery compartment - Dark gray - Includes battery - For
APC2200/PPC2200
Table 227: 5ACCBT01.0000-001 - Order data
For the battery compartment replacement part, see
"5ACCRPC2.0003-000" on page 282
in section "Replacement
parts".
2.3.6.1.3 Technical data
Model number
5ACCBT01.0000-001
General information
Battery
Type
Panasonic 1000 mAh
Service life
8 years
1)
Removable
No
2)
Design
Lithium
Certifications
CE
Yes
UL
cULus E115267
Industrial control equipment
Operating conditions
Pollution degree per EN 61131-2
Pollution degree 2
Environmental conditions
Temperature
Operation
-25 to 60°C
Storage
-25 to 60°C
Transport
-25 to 60°C
Relative humidity
Operation
5 to 90%
Storage
5 to 95%
Transport
5 to 95%
Mechanical characteristics
Housing
Material
Gray (similar to Pantone 432C) plastic
Weight
Approx. 13 g
Table 228: 5ACCBT01.0000-001 - Technical data
1)
At 50°C, 6 µA for the components being supplied.
2)
The battery is permanently installed in the battery compartment and cannot be replaced. The entire battery compartment must always be replaced.
