4
Joining Units
5
Slide the back panel colour-side facing down,
along the grooves in the side panels. Secure the
back in place using screws as shown.
Panel protectors should be fitted, prior to
standing the unit up. Fit 2 x to the bottom of
each side panel, approximately 50mm in from
front and back, as shown.
Now you can stand the unit up.
6
F
F
b
b
b
3
3
b
F
F
Starting in a corner make sure the first unit is level. Push the next unit up against the
first unit, and level. Check the sides are flush, and in line, and then clamp them together.
Pick two points, roughly in the middle of one side panel, towards the top and bottom of
the unit, and drill through into the adjoining side panel.
Now push connector into these holes, and then screw bolt in from the other side
and tighten with a screwdriver to secure.
l
A
b
b
b
F
F
will be on the
outside surface of the
Right Drawer Side.
Construction of Drawers
Before fitting the Cam Legs to your Drawer Fronts you will have to drill the holes required for the Handles
you have purchased separately. Drill through the appropriate pilot hole(s) for the Handles you have
purchased.
We do not recommend the use of Power Screwdrivers as they can too easily drive the Screws at an angle
causing them to breakout of the panel, and it is too easy to over tighten the Screws and strip the threads
formed in the chipboard.
PILOT HOLES.
From the REAR FACE of the Drawers drill through the
holes using a 2.5mm diameter drill. From the FRONT
FACE of the Drawers, open out the 2.5mm diameter
holes using a 5mm drill. Screw Handles to Drawer Fronts.
Screw the Cam Legs into the holes shown.
X
G
G
G
X
X
X
8
9
9
8
9
Fit the LH , and RH , drawer sides to the drawer back , using screws as shown.
Now slide the drawer base into place as shown.
8
9
X
11
will be on the outside surface of the Left Drawer Side.
Then fit cams into panels
and , as shown, ensuring
that the arrow is pointing
towards the drawer front.
9
7
8
8
7
Now fit the drawer front onto
drawer sides and , and
tighten cams clockwise.
8
7
AN
AN
AN
AN
11
11
7
7
7
7
