BandLuxe K530S User Manual Download Page 92

Appendix D: Important Safety Information and Glossary 

90

 

 

HSUPA (High Speed Uplink Packet Access): 

Advanced WCDMA that delivers 

uplink bandwidth intensive data at up to 5.76Mbps; typically associated with 
3.75G. 

HSPA+ (High Speed Packet ): 

This is also known as HSPA Evolved, is the 

next step and is more focused on delivering data services enabling speeds of up 
to 42Mbps in the downlink and 11Mbps in the uplink. 

IMEI (International Mobile Equipment Identity): 

A number unique to each 

GSM/UMTS device that can be used block network access by a stolen mobile 
device. 

IP (Internet Protocol): 

Routes packets over a network. 

IPSec (Internet Protocol Security): 

Security implementation of IP communications 

by authenticating and encrypting each IP packet during network communication. 

Kbps (Kilobits per second): 

A data flow measure; 1024 bits/second. 

LAN (Local Area Network): 

A data network with limited range but good bandwidth. 

Load Balance:

 A method for distributing network loads across different networks to 

optimize network traffic flow and increase network reliability. 

LTE (Long Term Evolution):

 High-speed mobile communication standard based on 

the GSM/EDGE and UMTS/HSPA network technologies. LTE provides downlink 
peak rates up to 300 Mbit/s and uplink peak rates up to 75 Mbit/s. 

Mbps (Megabits per second): 

A data flow measure; 1,048,576 bits/second. 

MDN (Mobile Directory Number): 

The telephone number of the mobile device. In 

other words, it is the directory number that is assigned to a mobile subscriber. 

MSID (Mobile Station Identification): 

The identification number for the mobile 

station. The 

MSID

 can be a 

MIN (Mobile Identification Number)

 or 

IMSI 

(International Mobile Subscriber Identity)

MSL (Maximum Segment Lifetime): 

The maximum amount of time (arbitrarily 

defined as 2 minutes) that a TCP segment can exist in the internetwork system. 

PAP (Password Authentication Protocol): 

The difference between PAP 

authentication and a manual or scripted login, is that PAP is not interactive. The 
username and password are entered in the client's dialing software and sent as 
one data package as soon as the modems have established a connection, rather 
than the server sending a login prompt and waiting for a response. 

PPP (Point-to-Point Protocol): 

An internet connection method. 

PIN (Personal Identity Number): 

Four to eight digital numbers SIM card security 

code; allows access to the carrier’s network. 

Rx: 

Shorthand for Reception. 

SIM (Subscriber Identity Module): 

A small card that contains key mobile device 

identification, subscription and contact information. 

Tx: 

Shorthand for Transmission. 

Summary of Contents for K530S






























































































Reviews: