7. CT 2 OUT
- One 1/8" mini connector. To be used with an IR emitter for control of a
CT610/600/310. This output is a sum of IR Data from CT-1, CT-3 & Home Theater.
8. Home Theater Routing
-On/Off DIP switches determine which of the nine IR FLASHER
outputs will emit IR to a shared source from the HOME THEATER IR inputs. These DIP
switches will allow the home theater keypad or IR sensor to control certain shared sources.
9. HOME THEATER IN / OUT
- Two 1/8" mini connectors.
IN - IR input from a Home Theater (same as Home Theater Sensor IR-IN).
OUT - IR output to a Home Theater product. This output is a sum of all IR Data coming into
the CT-1 (Global Output). This output can also be used as a global system IR output.
10. Flasher Out -
Nine 1/8" mini connectors. Each output is connected to a shared source using an
IR emitter.
11. CHAIN IN
- One 1/8" mini connector only used when chaining multiple CT-1s together. CHAIN IN
receives IR data from the previous CT-1 in a chain.
12. CT 1 Flasher IN
- Nine 1/8" mini connectors. One CT Receiver is connected by nine 1/8” mini
jack interconnects. Each interconnect should be connected corresponding to the IR output on
the CT Receiver back panel. i.e. IR OUT 1 connects to Flasher IN 1, etc.
13. CT 1 OUT
- One 1/8" mini connector. To be used with an IR emitter for control of a
CT610/600/310. This output is a sum of IR Data from CT-2, CT-3 and Home Theater.
IR
Input / Output Diagram
X
= IR In
O
= IR Out
CT-1 Back Panel
HOME THEATER
FLASHER OUT
CT 3 FLASHER IN
CT 2 FLASHER IN
9
CT 1 FLASHER IN
CHAIN
IN
CT IN MASTER
9
8
7
6
5
4
3
2
1
CT2
OUT
8
7
6
5
4
3
2
1
CT1
OUT
IN
RS-232
XMIT
ROUTING
RS-232
XMIT
SENSOR
9
8
7
6
5
4
2
1
CT3 / CHAIN
OUT
3
3
OUT
9
8
7
6
5
4
2
1
+12V
G
ND
RC
V
NC
NC
1
9
+12V
IR
IN
G
ND
SERIAL #
1
2
3 4
ON
5
6 7 8
9
5
