B&G Vulcan Series, Operator'S Manual

Page: 23 / 198

Select a favorites page in the pop-up to display it. The panel will
switch to the selected favorite after 3 seconds.
Creating a Man Overboard waypoint
If an emergency situation should occur, you can create a Man
Overboard (MOB) waypoint at the vessel’s current position by
selecting the
MOB
button on the
Home
page.
When you activate the MOB function the following actions are
automatically performed:
• a MOB waypoint is created at the vessel’s position
• the display switches to a zoomed chart panel, centered on the
vessel's position
• the system displays navigation information back to the MOB
waypoint
Multiple MOB waypoints are saved by repeatedly pressing the
MOB
buttons. The vessel continues to show navigation information to
the initial MOB waypoint. Navigation to subsequent MOB waypoints
needs to be done manually.
Cancel navigation to MOB
The system continues to display navigational information towards
the MOB waypoint until you cancel the navigation from the menu.
Delete a MOB waypoint
1.
Select the MOB waypoint to activate it
2.
Select the MOB waypoint's pop-up to display the MOB waypoint
dialog
3.
Select the delete option in the dialog.
A MOB waypoint can also be deleted from the menu when it is
activated.
Screen capture
You need to turn on the Screen capture option in the System
Settings dialog to be able to take a screenshot on a touch screen.
When the function is activated, you can take a screenshot on a
touch screen by double-selecting the title bar of an open dialog, or
by double-selecting the status bar if no dialog is open.
To view files, refer to
"Files"
on page 180.
Basic operation | Vulcan Series Operator Manual
23