B&G Vulcan Series, Operator'S Manual

Page: 21 / 198

Standby mode
In Standby mode, the Sonar and the backlight for screen and keys
are turned off to save power. The system continues to run in the
background.
You select Standby mode from the
System Controls
dialog.
Switch from Standby mode to normal operation by a short press on
the
Power
key.
Display illumination
Brightness
The display backlighting can be adjusted at any time from the
System Controls
dialog.
You can also cycle the preset backlight levels by short presses on
the
Power
key.
Night mode
The night mode option optimizes the color palette and backlight for
low light conditions.
Ú
Note:
Details on the chart may be less visible when the Night
mode is selected!
Locking the touchscreen
You can temporarily lock a touchscreen to prevent accidental
operation of the system. Lock the touchscreen when large amounts
of water are on the screen, for example, in heavy seas and weather.
This feature is also useful when cleaning the screen while the unit is
turned on.
You lock the touchscreen from the
System Controls
dialog.
You remove the lock function by a short press on the
Power
key.
Using menus and dialogs
Menus
You display a page menu by selecting the
MENU
button in the
upper right corner of the page.
• Activate a menu item and toggle on/off an option by selecting it
Basic operation | Vulcan Series Operator Manual
21