B&G Vulcan Series, Operator'S Manual, Page: 19 / 198

You switch between a panel’s dashboards by selecting the left and
right arrow symbols or by selecting the dashboard from the menu.
Editing a CZone dashboard
You can customize a CZone dashboard by changing the data for
each of the gauges. Available editing options depend on the type of
gauge and which data sources that are connected to your system.
For more information, refer to
"Instrument panels"
on page 155.
H5000 integration
The unit integrates with B&G’s H5000 Instrument and Autopilot
system.
The H5000 icon will be available in the
Tools
panel on the
Home
page when an H5000 system is available on the network.
Separate documentation is provided with the H5000 system. Refer
to this documentation for how to install and configure the H5000
system.
Remote controllers
You can connect a remote controller to the network and remotely
control the unit. To find out which remote controllers can be used,
refer to the product web page at:
www.bandg.com.
A separate manual is included with the remote controller.
Introduction | Vulcan Series Operator Manual
19