![background image](http://html1.mh-extra.com/html/bandelin/7185-00159050-004/7185-00159050-004_instructions-for-use-manual_470786007.webp)
1586-006 en/2022-08
7/46
Safety
/2
2.3 Danger of electric shock
The ultrasound bath is an electrical device. Failure to follow safety
rules can result in a life-threatening electric shock.
• Protect the ultrasound bath from moisture and wetness. Keep
the surface and controls clean and dry.
• Only transport the ultrasound bath in empty condition.
• Only drain the ultrasound bath when it is switched off.
• Do not spray or expose the ultrasound bath to splashing water.
• Always disconnect the ultrasound bath from the mains before
cleaning or maintenance.
• Only connect the ultrasound bath to a power outlet with a
grounded socket.
• If you notice a defect in the ultrasound bath, disconnect the
mains plug immediately. Do not connect a defective ultrasound
bath to the mains.
• Repairs should only be carried out by the manufacturer. See
chapter
• Position the ultrasound bath so that it is easy to unplug the
mains connection at any time and without difficulty.
2.4 Harmful to health due to ultrasound noise
The ultrasound noise typical of the process can be perceived as
very unpleasant. Remaining within a radius of 2 m for an extended
period of time may cause damage to health.
• Wear suitable hearing protection.
• Use a lid to reduce noise. The ultrasound bath can also be used
in a sound proof box.