5.0 appendix
The BTRK is a double track with top curve
C
that opens up to fit the top panel fitted with thick
cladding on the face Figure 5.1.1.
Cut vertical tracks to match dimensions for
low headroom or BTRK as shown in 1.4.2 initial
calculations on page 6. Assemble the track as
shown in Figure 5.1.2. The curve
C
must align
and butt up against the vertical track
B
snugly
and the top curve track needs to be close to the
lintel.
Before bracing the horizontal tracks, ensure that
they are square to the opening and level. To
check whether your diagonals are equal:
a) Measure from the top of the vertical track to
the end of the horizontal track.
b) Check both sides.
c) Adjust if necessary.
Refer back to 3.4 c) to finish installing horizontal
tracks.
Fig: 5.1.2
5.1 BTRK parts and install
Fig: 5.1.1
C
B
C
Panel Cladding
19
The Designer Series
&
P7 Industrial
™
installation instructions
