Operator’s Manual
8
WARNING
WARNING
Safety Precautions
Be sure to read these instructions completely to ensure safety.
Installation Location
This game is designed for indoor use only.
It must not be installed outdoors. The following conditions must be avoided:
1.
Direct exposure to sunlight, extreme high humidity, direct water contact, dust,
high heat or extreme cold.
2.
Vibration. The game must be installed on a level surface
Do not install in an area such that the game would present an obstacle in
case of an emergency (i.e., near fire equipment or emergency exists).
Handling
1.
Before operating the game, make sure that the main AC power hookup
includes a safety ground. This will help to ensure safe operation. Measure
the AC power line voltage. Verify that the voltage source is between 110 and
125 VAC.
2.
Before replacing any parts, turn the AC power OFF and unplug the game.
3.
The game includes areas where 120 VAC is present. Take care at all times
to avoid electrical shock whenever inspecting or adjusting the game.