Bancolini UNISCAN C6R, User Manual

Page: 153 / 385

10-5
Undecoded Scanner Emulation Interface
Undecoded Scanner Emulation Host Parameters
Beep Style
The Undecoded Scanner Emulation Host supports three different beep styles.
The default is to beep when the attached decoder issues the decode signal to the scanner.
This way, the scanner and the attached decoder beep at the same time.
The second option is to beep on the scanner's decode. This results in a double beep
sequence from most decoders, since the scanner beeps, and the decoder beeps (at a
different frequency) when it successfully decodes the output.
The third option is to not beep at all since the attached decoder issues the decode beep.
In all cases, if an error condition is encountered, the scanner issues error beeps.
*Beep On Successful Transmit
Beep At Decode Time
Do Not Beep