W
IRING INSTRUCTIONS
FOR
BAMONIV
TPS
OR
NIVAPRESS
SGE
25
TO CONNECTION HEAD
BJSC
BAMO IER GmbH
▪
Pirnaer Straße 24
▪
68309 Mannheim
Tel. +49 (0)621 84224-0
▪
Fax: +49 (0)621 84224-90
▪
www.bamo.de
▪
SU3733.doc 07/18
1
Installation, initial start-up and maintenance may only be performed by trained personnel! All applicable
European and national regulations regarding installation of electrical equipment must be adhered to.
The device may only be connected to supply power which complies with the specifications included in the
technical data and on the serial plate!
The device must be disconnected from all sources of power during installation and maintenance work!
The devices may only be operated under the conditions specified in their operating instructions!
Installation / Mounting:
1. Open connection head, remove cable tie and circuit board.
2. Feed the sensor cable from below into the connection head through the cable gland
BAMONIV TPS
NIVAPRESS SGE 25
Safety Precatutions: