www.balzar.se
Unite cable tray
required tools: hex key, crosshead
screwdriver, adjustable spanner.
cOMPOnentS
2 x t-part
1 x cable tray
8 x
Flat head
screw
2 x
end cap
2 x beam
Make sure your table is upside down
on a protective surface and there is
no beam installed. then place the end
caps on the beams (a).
repeat step 3 for the other beam.
carefully insert the t-part into the leg
and attach the t-part with 2 x Screw
for every t-part.
attach a beam to the t-part with 4 x
Flat head screws(b). then attach the
beam to the table with 3 x Screw (c).
b
c
if you want to install the cable tray,
unscrew 4 x Flat head screws from 1
beam.
install the cable tray, make sure the
holes match and attach with 4 x Screw
from step 5.
1
4
2
3
5
6
ASSEMBLY INSTRUCTIONS
Unite cable tray
2019-01-16
a
