www.balzar.se
PRIMA EXTEND
COMPONENTS
Secure the connecting plate to the benches using the
M6 screws (two on each side). Then stick two felt pads
on the metal to prevent it from scratching the floor.
Insert the double connecting plate in the designated
cutouts making sure that all the holes are aligned.
Screw out all adjustable feet so that they will touch the
ground (7-8 mm). Then carefully flip the bench upright.
2019-06-25
1
3
2
4
ASSEMBLY INSTRUCTIONS
Prepare the benches by laying them down on one side
next to each other on a protective surface.
PRIMA EXTEND
M6x20
Prima plus
Required tools: screwdriver.
Connecting
plate - double
Felt pad
Prima
