www.balzar.se
Required tools: hex key, flat head
screwdriver & cross head screwdriver.
COMPONENTS
1 x Tabletop
8 x M6
16 x M6
countersunk
2 x Mounting plate
4 x Cross nut
8 x Wood screw
2 x Leg
Attach the mounting plate to the leg.
a. Insert 2 x cross nut in the leg (use flat screwdriver to rotate)
b. put the mounting plate into place
c. attach the mounting plate with 4 x M6
(use a hex key and apply
maximum
force)
a.
b.
c.
Put the tabletop upside down on a protective surface.
Attach the leg + mounting plate to the tabletop with 8 x
M6 countersunk. Using a hex key and apply normal force.
Attach the mounting plate to the leg with 4 x wood screw.
Use a cross head screwdriver. Repeat step 1 + 2 for the
other leg.
Attach the other leg and gently turn the table upside down.
1
3
2
4
ASSEMBLY INSTRUCTIONS
BENT / B-110
BENT / B-110
2015-06-01
