baltur TBG 45 P, Installation, Use And Maintenance Instruction Manual

Page: 59 / 72

ENGLISH
23 / 34
0006160178_201711
BURNER X
Value indicated by
index 4
TBG 45P 3 ÷ 31 0 ÷ 3,2
TBG 60P 6 ÷ 34 0 ÷ 3.2
• Loosen the screw (1)
• Turn screw (2) to position the combustion head (3), referring to
index (4)
• Adjust the distance (x) between the minimum and maximum
according to the indications in the table
CAUTION / WARNING
The above adjustment is only indicative; position the combustion
head according to the characteristics of the furnace.
ADJUSTMENT OF SERVOMOTOR CAMS SQN72. XA4A20
FOR TBG...P
1
2
3
4
I 1st flame air regulation cam (80°)
II Total air closure (Burner stopped)( 0°)
III 1st flame air regulation cam (20°)
IV 2nd flame valve control cam (40°)
1 Camshaft-motor coupling insertion and exclusion pin.
2 Adjustable camshaft
3 Reference scale
4 Position indicator
To adjust the setting of the cams used, use the corresponding rings
(I - II - III - IV). The scale on the ring indicates the reference scale of
the rotation angle set for each cam.