baltur BGN 200 LX, Instruction

Page: 23 / 57

50 / 119
0006081062_200709
N° 0002933310
AIR ADJUSTMENT PRINCIPLE
NOT CORRECT ADJUSTMENT
Big air passage opening
Burner’s adjustable head
Combustion air inlet
Gate very closed
Burner’s head adjusting and fixing knob
Air passage relatively closed
CAUTION: avoid complete closure
CORRECT ADJUSTMENT
Combustion air inlet
Gate sensibly open
Burner’s head adjusting and fixing knob
Burner’s adjustable head
MAINTENANCE
The burner does not need special
maintenance. However, it is advis
-
able to check that the gas filter is
clean. It may also be necessary to
clean the combustion head. In this
case, dismantle the components of
the mouth.
Be careful when assembling again,
so as to prevent the electrodes from
to earth or in short circuit.
Also check that the ignition electrode
spark only occurs between the same
and the drilled plate disk.