The River, User Manual
PAGE
41
PAGE
41
pressed, is not doubled over time. If you press a second and a third time, is not tripled and quadrupled. If you press the
encoder when no key is pressed, a pause is inserted.
Registration "Real Time"
(
S KEY
C4)
Registration "Real Time"
(
S KEY
C4)
Registration "Real Time"
(
S KEY
C4)
Registration "Real Time"
(
S KEY
C4)
The display shows the number of steps consumed 48 available. Each step can receive up to 4 notes, polyphonic
sequencer. The sequence will be played "quantified" to the definition of
Divide
sequencer. The sequence will be played "quantified" to the definition of
Divide
(see below). It is therefore preferable to use
Divides
1/4 to 1/8 to record sequences in "real time" mode.
(see below). It is therefore preferable to use
Divides
1/4 to 1/8 to record sequences in "real time" mode.
(see below). It is therefore preferable to use
Divides
1/4 to 1/8 to record sequences in "real time" mode.
Tempo (30 ... 300), S KEY
D3 = Tap Tempo
Tempo (30 ... 300), S KEY
D3 = Tap Tempo
Sets the overall tempo of The River. Modules that use the Tempo can customize as fractions of tempo (see below
Divide).
External
Sets the overall tempo of The River. Modules that use the Tempo can customize as fractions of tempo (see below
Divide).
External
Sets the overall tempo of The River. Modules that use the Tempo can customize as fractions of tempo (see below
Divide).
External
clock mode, the tempo is recalculated. A rectangle flashes in the upper right corner of the screen to the rhythm tempo.
Divide (1/1 ... 1/8), S KEY
E3 = Divide -
S KEY
F3 =
Divide (1/1 ... 1/8), S KEY
E3 = Divide -
S KEY
F3 =
Divide (1/1 ... 1/8), S KEY
E3 = Divide -
S KEY
F3 =
Divide (1/1 ... 1/8), S KEY
E3 = Divide -
S KEY
F3 =
Adjusts the division of the BEAT which will sequence the arpeggio notes and "quantify" recording "real time" of a sequence.
Order, S KEY
D4 = Order -
S KEY
E4 = Order +
Order, S KEY
D4 = Order -
S KEY
E4 = Order +
Order, S KEY
D4 = Order -
S KEY
E4 = Order +
Order, S KEY
D4 = Order -
S KEY
E4 = Order +
Sets the playback order of the notes of the sequence.
up
Dwn
amount
descending Rnd
Random
Duration (1..8), S KEY
G4 = Duration -
S KEY
Duration = A4 +
Duration (1..8), S KEY
G4 = Duration -
S KEY
Duration = A4 +
Duration (1..8), S KEY
G4 = Duration -
S KEY
Duration = A4 +
Duration (1..8), S KEY
G4 = Duration -
S KEY
Duration = A4 +
Sets the ratio of the duration of the note / notes released. AT
1
the note is very short to
8
the note is almost continuous.
Sets the ratio of the duration of the note / notes released. AT
1
the note is very short to
8
the note is almost continuous.
Sets the ratio of the duration of the note / notes released. AT
1
the note is very short to
8
the note is almost continuous.
Sets the ratio of the duration of the note / notes released. AT
1
the note is very short to
8
the note is almost continuous.
Sets the ratio of the duration of the note / notes released. AT
1
the note is very short to
8
the note is almost continuous.
5. LFO Setup Settings
5. LFO Setup Settings
Active (No, Yes) S KEY
C3
Active (No, Yes) S KEY
C3
Enable or not the LFO CV. This allows transmitting on a resume (default jack # 1) an LFO for adding a new modulation source
to "vintage" equipment. This modulating voltage is symmetrical and maximum amplitude of +/- 10V.
Freq (0 ... 360), S KEY
E3 = Freq -
S KEY
F3 + = Freq Sets the
Freq (0 ... 360), S KEY
E3 = Freq -
S KEY
F3 + = Freq Sets the
Freq (0 ... 360), S KEY
E3 = Freq -
S KEY
F3 + = Freq Sets the
Freq (0 ... 360), S KEY
E3 = Freq -
S KEY
F3 + = Freq Sets the
LFO speed.
Wave (0 ... 8)
, S KEY
= G3 Wave -
S KEY
A3 + = Wave
Wave (0 ... 8)
, S KEY
= G3 Wave -
S KEY
A3 + = Wave
Wave (0 ... 8)
, S KEY
= G3 Wave -
S KEY
A3 + = Wave
Wave (0 ... 8)
, S KEY
= G3 Wave -
S KEY
A3 + = Wave
Wave (0 ... 8)
, S KEY
= G3 Wave -
S KEY
A3 + = Wave
Sets the LFO waveform.
0
constant 1
sine 2
triangle 3
Square 4
Rising saw tooth 5
Tooth descending sawtooth 6
Sample & Hold 7
random 8
Tape (strip flutter)