The River, User Manual
PAGE
28
PAGE
28
Source: Manual Alesis Andromeda
PW (0 ... 400):
manual adjustment of the width of the pulse wave when selected
PW (0 ... 400):
manual adjustment of the width of the pulse wave when selected
Source: Manual Alesis Andromeda
PWM LFO
or
PWM LFO / ENV (0 ... 127):
Modulating the pulse width by the LFO. For VCO2 the OSC2 ENV option selects the
PWM LFO
or
PWM LFO / ENV (0 ... 127):
Modulating the pulse width by the LFO. For VCO2 the OSC2 ENV option selects the
PWM LFO
or
PWM LFO / ENV (0 ... 127):
Modulating the pulse width by the LFO. For VCO2 the OSC2 ENV option selects the
PWM LFO
or
PWM LFO / ENV (0 ... 127):
Modulating the pulse width by the LFO. For VCO2 the OSC2 ENV option selects the
modulation source. Button lit is the filter envelope, otherwise the LFO.
b. Exclusive parameters VCO2
b. Exclusive parameters VCO2
SYNC:
Creates a harmonic content by interacting the two oscillators. When the frequencies of the VCO are close, the
SYNC:
Creates a harmonic content by interacting the two oscillators. When the frequencies of the VCO are close, the
phenomenon similar to a Hard Sync. When the frequencies are far apart, the interaction is related to a combination of the two
waves. By modulating the pitch of VCO2 by an LFO or envelope (cf. DLFO waves), one can create unstable spectral scans.
When SYNC is on, the pitch bend modulates the pitch of the VCO 2 (unlike the Moog The Source). To modulate a, use the
DLFO with the waveform MOD (wheel)
INTERVAL (-12 ... 11 - Off Keyb):
coarse detuning of VCO2 compared to VCO1 by semitone. The position Keyb Off
INTERVAL (-12 ... 11 - Off Keyb):
coarse detuning of VCO2 compared to VCO1 by semitone. The position Keyb Off
disconnects the VCO2 of a key follow.
FINE TUNE (-200 ... + 200):
Detune VCO2 late compared to the VCO1, over a range of plus or minus one semitone. When
FINE TUNE (-200 ... + 200):
Detune VCO2 late compared to the VCO1, over a range of plus or minus one semitone. When
INTERVAL is on Key Off, you can change its speed with the FINE TUNE, interesting function for use with the FM FILTER below to
create Ring Mod type sounds.
FM FILTER (0 ... 127)
audio modulation of the VCF cutoff frequency by VCO2
FM FILTER (0 ... 127)
audio modulation of the VCF cutoff frequency by VCO2
c. common settings
c. common settings
WHEEL CTL:
Activating the action of the modulation wheel on the amount of the LFO (ENV or filter if the option is selected for the
WHEEL CTL:
Activating the action of the modulation wheel on the amount of the LFO (ENV or filter if the option is selected for the
oscillator 2). This command is very convenient: Turn this knob to set the maximum modulation LFO on the oscillators and filters,
and then select this button. Thus, the assay of modulation up to the maximum that you set will be made with the dial.
