17
Trouble Shooting
Please check the following guide before contacting the BALMUDA Europe Service Center (P.18) or
the dealer that you purchased the product from.
Points to Check
□
Are your fuses blown, or is your
breaker tripped?
□
Is the AC adapter properly plugged
into the power outlet?
□
Is the AC adapter firmly connected to
the connector on the Body?
□
Is the Fan Guard bumping against the
Fan?
□
Is the Fan attached properly?
□
Have you lined the Fan Guard up
exactly with the Body so that there are
no gaps? Or, does the product issue
an electronic “beep, beep, beep” noise
when you press the Power Button?
□
Are you using old batteries?
□
Are the batteries’ +/- positions correct?
□
Are you pointing the remote control
toward the signal receiver?
□
What part of the product is broken?
□
Are you operating within the effective
distance?
□
How did it break?
□
Which part did you lose?
> Check your fuse and breaker.
> Plug the AC adapter into the power
outlet properly.
> Check the method of connection.
(
→
P.7, 8)
A short beep confirms that a proper
connection is established.
> Make sure the Fan Guard is properly
attached. (
→
P.13
❷
)
> Re-attach the Fan. (
→
P.14
❹
)
> The “Open and Shut Sensor” could be
operating. Make sure the Fan Guard is
properly attached. (
→
P.13
❷
)
> Replace with new batteries. (
→
P.9)
> Check the batteries’ +/- positions.
(
→
P.9)
> Check where the Body’s signal receiver is.
(
→
P.10)
> Use the remote control within 8 m.
(
→
P.10)
> Contact theBALMUDA Europe Service Center.
They will advise you whether on repairs are
necessary or what other measures, if any,
need to be taken. When contacting the
Center, please inform them of the model of
product that you have. (
→
P.18)
> Some parts can be purchased. Please
contact the BALMUDA Europe Service
Center. (
→
P.18)
Possible
Solutions
Fan will not
start
□
Is the Fan firmly secured with
the Fan Holder?
□
Is the Fan Guard bumping against the
Fan?
□
Is the Fan facing the right way?
□
Is the Fan Guard firmly attached and
correctly secured?
□
Has dust accumulated on the Fan or
Guard?
□
Are you turning the Fan Holder in the
right direction?
> Firmly attach the Fan with the Fan Holder.
(
→
P.14
❸
)
> Attach the Fan properly. (
→
P.14
❹
)
> Make sure the Fan Guard is properly
attached. (
→
P.13
❷
)
> Check that the Slide Lock on the top of the of
the Guard Lock Lever is in the “LOCK”
position. (
→
P.13
❶
)
> Airflow efficiency declines when dust
accumulates around the Guard. We
recommend a bi-weekly cleaning.
(
→
P.13, 14)
> Turn the Fan Holder in the right direction to
fasten. (
→
P.14
❸
)
Fan is noisy
during
operation
The airflow has
decreased
Can’t fasten
the Fan Holder
Remote
control doesn’t
work
The product
is broken
Lost a part
Problem
English
Summary of Contents for 3100 EGF EU
Page 20: ...19 ...
