Bally ProSlot 6000, Setup And Operation

Page: 36 / 444

SETUP AND OPERATION
2-36
©2004 Bally Gaming and Systems
ProSlot® 6000
| - Revised, || - New
Diagnostic Tests and Functions
The ProSlot
®
6000 has diagnostic tests and functions
used to evaluate or change machine operation. Each
is accessed by opening the main door and pressing the
TEST
button located on the front of the MPU assembly.
Every press of the button advances to the next test or
function. Pressing
CHANGE
restarts most tests. Closing
the door or pressing
RESET
exits diagnostics.
WIN PAID shows the number of the test followed by
a d . C
OIN IN
and
CREDIT
show information relating to
each function.
The following illustration shows a Hopper Test (04).
Diagnostic tests consist of:
• 01 Model Information
• 02 Output Test
• 03 Input Test • 04 Hopper Test
• 05 Reel Function Test • 06 Reel Tape Test
• 07 Reel Tilt Records • 08 Slot Communications
• 09 Display Test • 10 Payout Test
• 11 Game Optioning • 12 Peripherals Test
• 13 Data Vault™ Meters • 14 Memory View
• 15 Hopper Dump • 16 Top Box Test
This function enables the Operator to view information
stored in the Personality EPROM and SafeRAM™
without removing the MPU board. The SMI
documentation verifies the following information:
Code Description Code Description
010D Personality EPROM ID 015D Crazy Reels
011D Payback Percentage(s) 016D Bill Acceptor
012D Reel Map and Win Table 017D Denomination
013D Market Code 018D WBA CRC Checksum
014D Diverter Optic 019D Reel Time Clock
To access Test #1, press and release the TEST
button until 01 d appears in WIN PAID . Each item
of information automatically appears in the Message
Center. The Operator can manually advance by
successively pressing BET MAX, or pause the display
by pressing and holding SPIN.
The third digit of
WIN PAID
shows the number of each
item. For the first item, 01 0 d appears in
WIN PAID
.
C
REDIT
shows the Personality EPROM identification
number.
The “d” in WIN PAID indicates a
diagnostic function accessed
WIN PAID CREDIT COIN IN
0 4 d 1
.
4
25¢
04 in WIN PAID represents the Hopper Test
#1 - Model Information
Item 01 4 d indicates diverter optic configuration in
SafeRAM™. 0 in the example indicates a diverter
optic is not included with this machine.
Item 01 5 d indicates the reel operation in SafeRAM™.
0 in the example indicates normal reel spin. A “1”
would indicate crazy reel operation.
Item 01 6 d shows the bill acceptor stored in
SafeRAM™. Refer to the DS2 sw5-sw6 DIP Switch
table (page 2-10). The example indicates a machine
configured for a JCM WBA bill acceptor.
WIN PAID CREDIT COIN IN
0 1 4 d 0
25¢
WIN PAID CREDIT COIN IN
0 1 5 d 0
25¢
WIN PAID CREDIT COIN IN
0 1 6 d 0 2
25¢
When
WIN PAID
shows 01 1 d,
CREDIT
sequentially shows
the nominal and/or basic game percentages.
Item 01 2 d displays the reel map and win table
configuration stored in SafeRAM™. In the example,
reel map is #0 and the win table is #0. Currently all
SMIs are 0-0.
Item 01 3 d displays the two digit Market Code stored in
SafeRAM™. Refer to DS3 DIP Switch table (page 2-
10) in this module. The example shows configuration
for operating within Nevada.
WIN PAID CREDIT COIN IN
0 1 1 d 9 2 3 8
25¢
WIN PAID CREDIT COIN IN
0 1 2 d 0 - 0
25¢
WIN PAID CREDIT COIN IN
0 1 3 d 0 0
25¢