1.14 Use Cases
59
Figure 5: wxPropView - Selecting modes
Note
With the property
"Divider"
you can set if every signal (or every second, third etc.) from the rotary encoder is
used.
1.14.1.3.6
int Reset()
With this function you can reset the counter, which is saved in
InhibitBackwardUntil
←
-
LastPos
(p.
1.14.1.4
Working with a Basler Sprint line scan color camera
1.14.1.4.1
Introduction
Basler's Sprint line scan color camera uses a two line sensor with a Bayer Mosaic filter
mask. To use the demosaic algorithm correctly, you have to set the
•
BayerParity
.
There are 4 possibilities for the
BayerParity:
•
"Red-green"
•
"Green-red"
•
"Blue-green"
•
"Green-blue"
MATRIX VISION GmbH
