Balluff MATRIX VISION mvBlueFOX Series, Technical Manual

Page: 128 / 238

120
Figure 12: Corresponding histogram after adapting contrast
1.18.2.2.4 Step 4: Saturation and Color Correction Matrix (CCM)
Still saturation is missing. To change this, the
"Color Transformation Control"
can be used ( "Setting -
>
Base -
>
ImageProcessing - > ColorTwist" ):
1. Click on "Color Twist Enable" and
2. click on "Wizard" to start the saturation via "Color Transformation Control" wizard tool (since firmware version
1.4.57).
Figure 13: Selected Color Twist Enable and click on wizard will start wizard tool
3. Now, you can adjust the saturation e.g. "1.1" .
MATRIX VISION GmbH