Balluff IO-Link BNI LH1-303-S11-K091, User Manual

Page: 37 / 58

www.balluff.com 17 english
BNI LH1-303-S11-K091 / BNI LH1-313-S11-K091
Network interface – Digital hub
The specifications are typical values for 24 V DC at room
temperature.
The module is fully operational immediately, with full
accuracy after warm-up.
Further data can be found at www.balluff.com
on the product page.
10.1 Ambient conditions
Ambient temperature −20…+60 °C
Storage temperature −25…+70 °C
Protection class
(in screwed state)
IP67
10.2 Electrical data
Supply
Supply voltage U
S
18…30.2 V DC
Supply voltage U
A
12…30.2 V DC
Voltage ripple (supply voltage) < 1%
Power consumption without
load at U
S
= 24 V
40 mA
Digital I/O properties
Input Type 3
1)
Output current
2)
≤ 200 mA
Total output current ≤ 2 A
Sensor supply output current
(Pin 1)
≤ 500 mA
10.3 Electrical connection
IO-Link interface/port M12, A-coded, 4-pin,
plug
Input/output ports 8 × M12, A-coded,
5-pin, socket
1)
As per IEC 61131-2
2)
Outputs are overload and short circuit-resistant
10.4 Interface
IO-Link version 1.1.3
Data transmission rate COM3 (230.4 kBit/s)
Minimum cycle time 2 ms
Process data length
Input 6 bytes
Output 2 bytes
10.5 Materials
Housing material Plastic (PC Lexan
EXL9414T)
10.6 Mechanical features
Installation 2-hole screw mounting
Ground strap fastening Screw M4
Dimensions (W × H × D) 54 × 141.3 × 39.2 mm
Weight Approx. 125 g
10.7 Approvals and markings
Additional information on directives, approvals and
standards can be found at www.balluff.com on
the product page.
The CE Mark verifies that our products
meet the requirements of the current EU
Directive.
10
Technical data