Balluff BVS SC 1280Z00-07-000 Series User Manual Download Page 8

 

8  

 

 

BVS SC-_1280Z00-70-000 
SMART

CAMERA

 IO

 

 

 

1.6  Copyright 

Copyright © Balluff GmbH, Neuhausen a.d.F., Germany, 2021. All rights reserved. In particular: Right to duplication, 
modification, dissemination and translation into other languages. Please note that all texts, graphics and images con-
tained in these operating instructions are protected by copyright and other protection laws. Commercial duplications, re-
productions, modifications and disseminations of any type require the prior written approval of Balluff GmbH. All infor-
mation and notes in these operating instructions, particularly the chapter Safety Instructions, must be observed. 

1.7  Legal requirements 

The General Terms and Conditions of Balluff GmbH in their respective current version and the conditions in these oper-
ating instructions exclusively apply to all deliveries of products and to all other services of Balluff GmbH (henceforth re-
ferred to as “GTC”). The provisioning of the software is exclusively subject to the respective current GTC, the conditions 
in these operating instructions as well as the regulations of the “Balluff Enduser Licensing Agreement”. You may use the 
software only in compliance with these provisions. If they should not yet be available, Balluff GmbH will gladly provide the 
current GTC upon request. 

The 

SMARTCAMERA

 uses an embedded Linux/GNU as the operating system. Also used are a variety of freely available 

tools which were published under various open source licenses. Some licenses require that the source code and modifi-
cations be published. These sources are published on the Product homepage. 

The license texts for all software products used can be downloaded from the web interface along with the manuals. They 
are available as ZIP files. 

1.8  Updates and upgrades 

Balluff GmbH is authorized 

– but not obligated – to make updates or upgrades of the firmware available via the website 

of Balluff GmbH or in any other form. In such a case, Balluff GmbH is authorized 

– but not obligated – to inform you 

about the updates or upgrades. The use of such upgrades or updates assumes that you accepted the validity of the cur-
rent GTC as well as the additional conditions in the operating instructions. 

1.9  Trademarks 

The product, trade, company and technology designations used (e.g. Microsoft®, Windows 7®, Internet Explorer®, 
Google Chrome®, Mozilla Firefox® and HALCON®) are trademarks of the respective owners. 

Summary of Contents for BVS SC 1280Z00-07-000 Series




































Reviews: