26
BVS SC-_1280Z00-70-000
SMART
CAMERA
IO
4.2 Step 2: Turn on SMARTCAMERA
Now connect the power supply at the Power port with the power supply (24 V).
The
SMARTCAMERA
starts up and is operational after approx. 30 seconds.
At the start, the
SMARTCAMERA
opens the most recently opened inspection program and is in the same process state
it occupied at switch-off.
4.3 Step 3: Opening the BVS Cockpit web interface
The camera is being configured via the BVS Cockpit. This web interface is being opened and operated via web brows-
ers.
The following commercially available browser are being supported:
•
Google Chrome version 32.0 and above
•
Mozilla Firefox version 24.0 and above
•
Microsoft Internet Explorer version 11 and above
•
Microsoft Edge version 40 and above
NOTE
JavaScript must be enabled in the web browser.
1. Record the serial number of the
SMARTCAMERA
.
The serial number is located on the nameplate on the
SMARTCAMERA
.
If the nameplate is not visible, you can also locate the
SMARTCAMERA
in the network via Windows Explorer
(\\
192.168.10.2\
).
2. To do so, select the network folder
to display all the network devices.
It also lists the connected
SMARTCAMERA
cameras.
3. To open the configuration screen of the
SMARTCAMERA
, perform the following steps:
a. Open the web browser.
b. Enter the following URL: http://
c.
Confirm the entry.
NOTE
More information about the configuration interface of the BVS Cockpit can be found in the
software manual (BVS Cockpit manual) on the Balluff website and on the
SMARTCAMERA
.
If there is already another
SMARTCAMERA
in the network, you can also connect with
this
SMARTCAMERA
and change to any other
SMARTCAMERA
in the local network using
this interface.
