Balluff BVS ID-M1280 F1 Series, Configuration Manual, Page: 265 / 316

BVS ID-M1280xF1-xx-xxx
english 107
Name Index Subindex Access Length Data type
Data
Storage
Default
Device Access Locks
Device Access Locks
0x000C
(12)
0 R/W 2 bytes UINT16 0
4.4.5 System Commands
Command Value Device Action
0x80 (128)
Device Reset – Device Reset means a warm start of the BVS ID. During this process, the
microcontrollers are restarted, and all initializations performed again without any change
made to the parameter values
0x81 (129) Application Reset
0x82 (130) Reset Factory Settings
0xA5 (165) Maintenance Reset
0xA7 (167)
Statistics Reset – Resets all output parameters to 0 and all user settings to the default
values.
0xA8 (168)
Statistics Start Min/Max/Avg – Starts the statistics of the minimum value/maximum value/
average calculation.
0xA9 (169) Statistics Stop – Stops statistics operation completely.
0xAC (172) Statistics Start Moving Average – Starts the statistics of the moving average calculation.
0xAF (175) Start Device Discovery
0xC0 (192)
Set Reference Orientation – Sets the reference orientation of the actual position of the
BVS ID. Responses: ACK: command successful, reference stored.