70
BVS HS-Q Series
Standard Hand Held Barcode Reader
Enter/Exit Programming Mode
4
Configuration Using Barcodes
Double Read
Timeout
Double Read Timeout prevents a double read of the same label by setting the minimum time
allowed between reads of labels of the same symbology and data. If the unit reads a label and
sees the same label again within the specified timeout, the second read is ignored. Double Read
Timeout does not apply to scan modes that require a trigger pull for each label read.
$CSN-
Double Read Timeout = 0.1 Second
$CSN-
Double Read Timeout = 0.2 Second
$CSN-
Double Read Timeout = 0.3 Second
$CSN-
Double Read Timeout = 0.4 Second
Double Read Timeout = 0.5 Second
$CSN-
Double Read Timeout = 0.6 Second
DEFAULT
$CSN-
Double Read Timeout = 0.7 Second
$CSN-
Double Read Timeout = 0.8 Second
