Balluff BVS HS-QC-SDR-MA-01-01, Operation Manual

Page: 33 / 296

33
www.balluff.com
BVS HS-Q Series
Standard Hand Held Barcode Reader
Enter/Exit Programming Mode
4
Configuration Using Barcodes
4 Configuration Using Barcodes
4.2 RS-232 Interface
"Baud Rate" on page 34
"Data Bits" on page 35
"Stop Bits" on page 35
"Parity" on page 36
"Handshaking Control" on page 36
Use the programming barcodes in this section if modifications to the standard RS-232 interface
settings are necessary to meet your system’s requirements. Additional settings which apply to
both the RS-232 and USB interfaces are available in the next section,
"RS-232/USB-Com Inter-
faces" on page 37 .
Reference Appendix B The most common configuration settings are listed in the “Default” column
of the table below. Page references are also provided for feature descriptions and programming
barcodes for each parameter. A column has also been provided for recording of your preferred
default settings for these same configurable features.
for a listing of standard factory settings.